OPERATING INSTRUCTIONS
Always choose a safe location for the Dehumidifier, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
WARNING Keep all objects at least 1 metre from the front, sides and rear of the appliance.
Leave the appliance to stand for one hour after transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant settle.
Ensure that the water container is positioned correctly.
Ensure all external windows and doors are closed before turning on the unit.
Plug into power supply and switch on at the mains. The dehumidifier will display the current humidity
level on the control panel. The POWER indicator light will illuminate to show power to the unit.
To turn the Dehumidifier on, press the POWER button.
Use the FAN SPEED button to switch between High and Low fan speeds.
As long as the water container is not full, the Dehumidifier will continue to operate until it is switched
off manually.
If the Dehumidifier is switched off manually and then switched back on, the compressor will start to
operate after three minutes.
To turn the Dehumidifier off, press the POWER button.
The louvre can be adjusted manually by lifting the Louvre at the opening and pushing it upward or
pressing it back down to closed.
This Dehumidifier is designed to provide an optimum performance. It is not recommended to operate
in ambient temperature exceeding 35
°C or Lower than 15°C.
Press the HUMIDITY SET Button to set the desired humidity level in the room, each press of the
HUMIDITY SET button will adjust in 5% increments from 40-80%.
Once you have set the desired humidity level, the LED will display the room humidity level again and
will adjust as the room humidity level increases or decreases.
When the relative humidity in the room is lower then the selected humidity, the unit will automatically
stop dehumidifying until the humidity level increases again.
TIMER OFF
When the unit is operating press the TIMER button to set the length of time that you would like the unit
to run for before turning off. Each press of the TIMER button will adjust the length of time by 1 hour
increments from 1
– 24hours. To turn off the Timer function, set the Timer back to “00” hours or simply
turn the unit off.
TIMER ON
When the unit is Off press the TIMER button to set the length of time that you would like the unit to
remain off before turning on. Each press of the TIMER button will adjust the length of time by 1 hour
increments from 1
– 24hours. To turn off the Timer function, set the Timer back to “00” hours or simply
turn the unit on manually.
WARNING! Take care in positioning your dehumidifier, using the timer will mean the unit will come on
automatically. Fire may result if placed next to combustible material.
WATER TANK FULL
A beep signal will sound 15 times. The WATER FULL indicator light will illuminate on the control
panel.
The compressor will stop automatically, and the unit will stop dehumidifying.
Empty the water container and replace it in the correct position. The Dehumidifier will continue
dehumidifying when the compressor automatically restarts after approximately three minutes.
