background image

IMPORTANT

 

 

This appliance is fitted with an automatic thermal cut-out safety feature to reduce the risk of 

damage to appliance due to overheating. If the appliance overheats the heater element will 
cut out whilst the fan will still continue to run to allow the fire to cool down sufficiently.

 

 

Once the appliance has cooled down the thermal cut-out will reset itself and switch the heater 

back on. If the problem persists switch the appliance off and disconnect the power at the switch 
and plug socket. Check that the heater warm air outlets and the inlets are not obstructed (the 

outlets and inlets are situated on the underside of the upper canopy). If the fire is installed within 

a chimney ensure that the chimney is blocked off as any draught can cause this problem.

 

 

If the heater is still not operating correctly disconnect the appliance and seek expert advice.

 

 
 

Maintenance Instructions

 

 

Always remove the plug from the socket-outlet and allow the heater to cool down 

before cleaning. User maintenance should only be carried out by a competent person.

 

 

Light accumulated dust may be removed from the appliance with a soft dry cloth.

 

 

The exterior surface of the appliance can be cleaned with a soft damp cloth (not dripping wet).

 

Dry the exterior surface before operating the heater.

 

 

Household glass cleaner can be used on the fire glass.

 

 

WARNING!

 

 

Do not immerse the heater in water.

 

 

Do not use any cleaning chemicals such as detergents and abrasives.

 

Do not allow the interior to get wet as this could create a hazard.

 

 

In the event of malfunction contact the manufacturer, do not try to repair the heater 

yourself as this may result in a fire hazard or electric shock.

 

 

 

Environment

 

 

 

Do not dispose of electrical appliances as unsorted municipal waste. Use 

separate collection facilities. Contact your local government for information 

regarding the collection services available in your local area. If electrical 

appliances are disposed of in landfills or dumps hazardous substances can 
leak into the groundwater and get into the food chain, thus damaging your 

health and wellbeing.

 

 

When replacing old appliances with new ones the retailer is legally 

obligated to take away your old appliance for disposal free of charge.

 

 
 
 
 

 

Page 11

 

Содержание CEVRSARE













Отзывы: