CellPath CellTec JAX-0300-00A, Руководство пользователя

Страница: 11 / 20

8. The alarm sound will last for 1 minute and the timer will keep on counting up,
until the user cancels the alarm and timer.
9. The user may cancel the alarm/light and reset the timer by pressing the “Start/
Stop” key.
10. When several alarms are sounding, press the rack selector button to select the
correct rack and then press the “Start/Stop” key to cancel the alarm and reset
the timer.
Note: When the LCD screens start to become dim, please replace the AAA
batteries used in the LEAN Timer Head. Access to the battery compartment can be
found at the rear of the LEAN Timer Head.
Cleaning Instructions
1. The case work and door of the Mini Section Dryer, including the control panel,
may be wiped using small quantities of mild detergent or polishes applied with a
soft cloth.
2. The Section Dryer chamber will require cleaning at regular intervals, using a
minimal quantity of mild domestic detergent applied with a soft synthetic sponge.
WARNING:
SCOURING PADS OR DE-SCALING AGENTS MUST
NOT BE USED TO CLEAN THIS INSTRUMENT.
Miniature Circuit Breakers
Located on the rear of the bath. In the event of a fault, push back in to reset. If fault
situation continues, please contact your Service Engineer or CellPath Ltd.
Latching Safety Cut Out
The latching safety cutout operates if the section dryer goes into a fault condition.
This may be due to either overheating or underheating. In either situation the heat-
ers will cease and the display will be blank. The amber neon indicator will also go
out. The safety cut out must only be reset by a qualified engineer. If the fault persists
please contact your Service Engineer or Cellpath Ltd.
CellTec Mini Section Dryer
10