PRODUCT INTRODUCTION
The AC/DC rechargeable ultrasonic mist fan is designed
with digital control system. It has device for storing
water. It can lower surrounding temperature, freshen
the air with equipped ion humidify the air through the
principle of water misting. LED panel makes it easy to
use. It enables both corded and cordless operation.
IMPORTANT NOTES
Please read the instruction manual carefully before
operating this unit.
1. Make sure that the home power supply consistent
with the product before plug in.
2. Switch off and disconnect from the power outlet
when not in use or before cleaning.
3. Unplug from power source when not in use unless
recharging.
4. Do not expose the unit to rain and keep out of reach
of water on the control panel or LED for proper use.
5. Do not put the fingers or any objects inside the fan
grill during operation.
6. Do not operate the unit if there is any damage to the
power plug or cord - take the unit to our after sales
service center for repair, do not attempt to undertake
any required repairs yourself.
7. Wipe clean with damp cloth only - do not use any
abrasive cleaners.
8. This appliance is not intended for use by persons
(including children) with reduced physical, sensory,
or mental capabilities or lack of experience and
knowledge unless then have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
9. Please recharge the unit when power is low.
10. Do not use the misting mode when water tank is
empty; water level in must be above minimum level
for this function to operate, otherwise it may cause
water pump malfunction.
11. Switch off the functions when the battery is being
charged. Otherwise will lower the efficiency of
charging.
12. Please charge the battery 14 to 16 hours every month
even the unit will not be used. In absence of charging
over long period of time, the battery will be malfunction
and damaged.
13. Do not use the misting function if unit is to be used
in a damp place.
14. If unit is being stored up for a long period of time
without use, empty the water tank before storing or
transporting the unit.
HOW TO ASSEMBLE THE WHEELS (SEE DRAWING 1)
1. Attach the four wheels to the base, then insert the
four assembled bases into the unit.
POWER ON/OFF OPERATION
Make sure that the home power supply is consistent
with the product before plug in. Firslly, turn on the main
power ON/OFF switch at the rear (Feature 24) and press
the "fan power ON/OFF button"(Feature No. 15) on the
control panel or (Feature No.27) on the remote controller
to start operation, then the LED light (Feature No.8) will
become illuminated on the control panel and follow the
fan speed operation below. Press the same button to
turn off the function.
** For cordless (DC) operation, please refer to section
“About the rechargeable battery”.
FAN SPEED OPERATION
Select the required fan speed to Low/Medium/High by
pressing the "Fan Speed Button"(Feature No.14) on
the control panel or (Feature No. 31) on the remote
controler. The LED light of selected speed will become
illuminated on the control panel and the set speed will
be memorized and kept unit the next operation.
MISTING OPERATION
1. Ensure the unit is placed on a level surface and
unplug from the power and switch off all the function
when refilling water.
2. Remove the water tank (Feature No.26) and fill water,
but do not fill water over the Marking Line (see
drawing 1 below) to ensure water does
not overflow.
1. Remove the
water tank and
fill clean water.
2. Tighten the cover
in clockwise
direction.
4.
Put the water tank
back to the unit.
3. Turn the water
tank upside
down to make
sure no leakage.
DRAWING 1
Marking
Line
2. Tightening the screws with a screwdriver in a
clockwise direction.
3. Wheels can be locked in
position if required.
3. Misting function will not operate effectively if water
not enough.
4. Connect to the power socket, turn on the main switch