Intelligent UV Lamp
Register and log in
1
）
Go to the App store and download the "tuya" APP.
2
）
After successfully download the “tuya “APP then installs it.
3
）
Open "tuya" and select "Register Account" to enter complete
information to register.
4
）
After successfully register, enter the registered account and
password , then click "Log in" to enter “Add Device” menu.
Network paring
1. Connect your phone to the normal 2.4G Wi-Fi network.
2. Turn on the device and power switch.
3. 1) When starting the machine for the first time, the Wi-Fi indicator
will flash quickly and enter the distribution network mode.
3.2) If the equipment has been configured before, press and hold the
power key for 5 seconds to enter the distribution mode.
4. Open the “tuya” app, click “Add device” or "+" to enter “add device”
menu, then select "others".
5. Select the same Wi-Fi which your phone is connected to, enter the
correct password, and click “Next” to start searching the device.
6. Checking whether the Wi-Fi indicator is flashing quickly. If it’s
flashing, please select “confirm the indicator is flashing”.
7. After finding the device, it will automatically connect the device and
pairing the network. .
8. After the network pairing is successful, rename the device name,
click "Complete", and then display "Add Successfully".
Tuya app control
Enter the control menu, do as the following shown
：
1. Click on / off, default time is 10 seconds to turn on the UV-C
lamp (start the radar detection, if the moving body or animals
are detected, it will not start until 10 seconds after detecting
the living body or animal left)
2. Timing function: You can set to start/stop the UV lamp from
a certain time (default working time is the current default time
selected on the main panel).
3. Delay function: You can set the delay time according to your
needs.
Replace the lamp tube
If the lamp tube needs to be replaced, please replace with the
original lamp tube and complete the operation under the
guidance of professionals:
1. Locate and remove the fixing screws for the top cover under
the top seat.
2. Rotate the top cover clockwise to unlock it.
3. Uncover the top cover, and then remove the fixing foam.
4. Take out the old lamp tube upwards.
5. Install the new lamp tube to the lamp base, cover with the
fixing foam.
6. Fasten the top cover and rotate it counterclockwise to lock it.
7. Tighten the fixing screws to complete the replacement.
06
