Cell2 SDF104H, Руководство по установке и эксплуатации

Страница: 4 / 12

- 2 -
CONTENTS

Siren amplifier x 1 pc

Control wire harness x 1 pc
(30cm)

Terminal block x 1 pc

Sheet metal screws x 4 pcs
( ø 3/16" x 3/4")

Tooth lock washers x 4 pcs

Controller x 1 pc

Controller clip x 1 pc

Sheet metal screws x 2 pcs
( ø 4 x 16mm)

Decal x 1 set

Manual x 1 pc
Accessories

Extension cable x 1 pc
(4m)

RJ45 coupler x 1 pc
SPECIFICATIONS
Input Voltage: 12~24VDC
Siren Output Power: 100 Watts
Siren Output Load: 100W-ACR 11Ω
Siren Frequency: 758Hz - 1587Hz; 447Hz - 596Hz (HI/LO)
Max. Current:
10A @ 12VDC / 5A @ 24VDC (w/o light control outputs)
30A @ 12VDC / 25A @ 24VDC (w/ 4x light control ouputs)
Standby Current: 0 mA (w/o IGN wire) / <0.35 A (w/ IGN wire)
Operating Temperature Range: -30
�
~65
�
Light Controls:
4x 5A light control outputs
Fuse Ratings: Built-in 5A blade fuse on each of the 4 outputs (under chassis);
15A blade fuse for the amplifier
Dimensions(amplifier): 126mm x 130.7mm x 41.6mm
Dimensions(controller) : 63.9mm x 132mm x 26.9mm


Accessory

SDF104H
Siren Amplifier
NOTICE TO INSTALLER
Before installation and operation ― read all instructions and warnings.
Deliver this manual to the end user of this product.
Installation & Operation Manual








Front View
Rear View
