To extend tripod legs, open each tightening clip
to release the tripod leg.
To set up the tripod, spread the legs outward
until they are fully extended and push down
center locking brace.
Item #31132
Quick Set-up Guide
1
2
3
Extend each of the three tripod legs down 6-8".
All three legs should be the same length to
provide a level platform for the telescope.
4
7
Thread the tray into the threaded hole in the
center of the leg brace.
5
Place the accessory tray on top of tripod's
center leg brace.
6
Place optical tube on mount as shown above.
Line up hole on tube with the mounting screw
on the tripod head.
8
To attach the tube to the mount, thread the
screw into the mount using the threaded
adapter on the bottom of the tube.
9
PowerSeeker2 60
Your PowerSeeker 60 includes: optical tube; tripod
with center support bracket ; three eyepieces; a 3x
barlow lens, finderscope and bracket; eyepiece
accessory tray; telescope carrying case; accessory
case; The Sky™ CD software; owner’s manual.
Item# 21028
Use the three tightening clips located on each
leg to secure the extended legs in place.
Questions or Problems with Set-up?
CONTACT:
Celestron Technical Support: 310
.
803
.
5955
