background image

Product design and specifications are subject to change without

prior notification.
Designed and intended for those 13 years of age and older.

For complete specifications and product information, visit: www.celestron.com

© 2020 Celestron • All rights reserved

celestron.com/pages/technical-support 

2835 Columbia Street • Torrance, CA 90503 USA

3.  

Take the 1.25” eyepiece and if necessary remove the rubber eyecup by pulling it straight 
off the eyepiece body. 

4.  

Loosen the set screws located on the eyepiece holder on the inside of the adapter. Place 
the black portion of the eyepiece into the eyepiece holder and tighten the screws to 
secure the eyepiece in place.

5.  

Now take the adapter with the phone and eyepiece attached and insert the chrome 
barrel of the eyepiece into the diagonal on the back of the telescope’s focuser. Secure it 
in place by tightening the set screws on the diagonal.

6.  

Activate your camera app on your smartphone and adjust the focus, just as you would 
the eyepiece, this time using the image that appears on your screen.

NOTE: Make sure you turn the phone’s flash off.

7.  

When the image appears sharp snap your image. It is best to try this in the daytime first, 
then, once everything is setup correctly, take it outside and try shooting the Moon. Once 
you have practiced and are comfortable using the low power eyepieces, try using the 
camera adapter with a more powerful eyepiece for higher magnification.

4

5

3

SPECIFICATIONS

Optical Design

Refractor

Aperture (mm)

60mm (2.36”)

Focal Length (mm)

700mm (28”)

Optical Coatings

Fully coated

Focal Ratio

12

Focal Length of Eyepiece 1

20mm (0.79”)

Magnification of Eyepiece 1

35x

Focal Length of Eyepiece 2

4mm (0.16”)

Magnification of Eyepiece 2

175x

Finderscope

5x24

Star Diagonal

1.25” Erect image diagonal

Highest Useful Magnification

142x

Limiting Stellar Magnitude

11.4

Resolution (Rayleigh)

2.32 Arc seconds

Resolution (Dawes)

1.93 Arc seconds

Light Gathering Power

73x

Optical Tube Length

711mm  (28”)

Barlow Lens

3x

Star Diagonal

1.25” Erect image diagonal

Highest Useful Magnification

142x

Tube Color

Black

Total Telescope Kit Weight

7 lb (3.18kg)

Software

Starry Night Basic Software

Содержание PowerSeeker 60AZ









Отзывы: