3
F I R S T S C O P E A Z
Figure 2-1
The Firstscope AZ fully assembled. Use this illustration and others throughout this manual, to famil-
iarize yourself with the various parts of your Firstscope AZ telescope.
3.
Attach the accessory tray to the leg braces.
With the tripod set up, you can adjust the height of the tripod. To do this:
1.
Loosen the wing nuts on the lower portion of the tripod leg.
2.
Slide the center slat of the leg away from the tripod head until at the
desired height.
3.
Tighten the wing nut (completely) to hold the leg firmly in place. A wrench
is provided to hold the bolt in place while you are turning the wing nut.
Repeat this process for each tripod leg.
Adjusting the Tripod
Height
