10
21
Secure the tube to the base by
tightening the locking screw on the
top of the base.
11
Insert the chrome barrel of the star
diagonal into the focuser and tighten
the two silver screws to secure in place.
While observing, tube should be
positioned as shown above.
Before you begin viewing, please
remember to remove tube lens cap.
Before you can begin observing,you must setup your
hand control, align your finderscope and align your telescope.
Step by step instructions are included
in the following Hand Control Setup section.
Quick Set-up Guide
60
&
80 LCM Telescopes
22
Return the battery holder back inside
the base and replace the cover.
20
19
Place 8-AA batteries (user supplied)
inside the battery holder.
Gently remove the battery holder
from inside the battery compartment.
17
Press the tab on the front of the
battery compartment and remove
the cover.
16
Plug Computerized Hand Control
into the “Hand Control” port on
the fork arm.
15
Slide Computerized Hand Control
into the hand control holder as
shown above.
14
Attach plastic hand control holder to
the tripod leg.
13
Tighten silver screw to secure.
12
Select the low power (25 mm)
eyepiece and insert it as shown
above.
18
