Step 3: Attach the main telescope tube to the tripod hub.
To do this, locate the threaded hole on the base of the main
telescope tube and the threaded rod on the top of the tripod
hub. Screw the rod into the hole.
Step 3: Point your telescope at the target you wish to view.
a. Adjust the ALTITUDE (up-and-down position) by loosening
the thumb screw on the bottom of the tripod hub and
angling the telescope up or down.
b. Adjust the AZIMUTH (horizontal position) by loosening
the tripod adjustment collar, rotating the telescope, and
then retightening the tripod adjustment collar once in
position.
Use Your Telescope
Step 4: Tighten and adjust by rotating the tripod adjustment
collar.
YOU ARE NOW READY TO USE YOUR TELESCOPE!
Step 1: When you are ready to view through your telescope,
remove the plastic cover on the eyepiece.
Step 2: Remove the dust cap.
Step 4: Look through the eyepiece and bring your subject
into focus by rotating the collar on the base of the eyepiece.
