©2010 Thermalogic Corporation®, Celestial Effects® is a trade mark of Thermalogic Corporation®, All Rights Reserved.
TUBE OVERDRIVE SECTION
GAIN
:
Controls the intensity of the tube overdrive section’s FUZZ.
EDGE
:
This knob controls is essentially a second order gain control of the amplifier section but also greatly effects the
edge or attach of the signal. Turning the knob clockwise will yield an edgier or more biting sound and higher gain.
Rolling the control counterclockwise will smooth out the “edge” or attack and also reduce the gain. It also creates
a pseudo compression effect to the tone.
VOLUME
:
Controls the intensity of the tube overdrive section’s VOLUME.
SPECIFICATIONS:
True Bypass Switching
Input impedance: 1 Meg Ohm
Output impedance: 10K Ohm
Current Draw:
Approximately 280 mA at full ON
POWER REQUIREMENTS:
Any HIGH QUALITY 9 VDC regulated power adapter with a 2.11mm x 5.5mm barrel plug type connector which
utilizes a “Center Negative” pin configuration as per the above diagram. Celestial Effects recommends the Carl Martin
Powerjack 9VDC power supply or similar. This power supply is capable of providing 1000 mA of power and is noise
free. The more the capacity of the power supply, the less chance of noise and hum due to a power supply being pushed
to its current capability limits.