Celabs HX40M Скачать руководство пользователя страница 2

PANEL VIEW & FUNCTION

INSTALLATION VIEW

SPECIFICATIONS

Cable

CE labs recommends using a high-quality CAT5e or CAT6 UTP cable. Distances

over 30 meters, it is recommended to use a CAT6 cable. Do NOT use STP cable.

Transmission Distance

The transmission distance will be affected by different HDMI equipment, HDMI jumper

cables, patch panels, poorly assembled RJ-45 connectors, and CATx cable quality

.

 

RJ45 Define: Video Link (TIA/EIA-568-B)

1. Orange-White   

TMDS DATA2 +

2. Orange  

 

TMDS DATA2 –

3. Green-White    

TMDS CLOCK + / HDMI 5V

4. Blue     

 

TMDS DATA1 +

5. Blue-White  

 

TMDS DATA1 –

6. Green  

 

TMDS CLOCK – / HDMI 0V

7. Brown-White    

TMDS DATA0 +

8. Brown  

 

TMDS DATA0 –

Caution

1. Keep cables away from any equipment with an electromagnetic wave, e.g., 

    

mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power 

    

lines...etc.

2. This device is not a network device, do not connect with a network to avoid 

    damages.

HX40M Transmitter

ITEM

480i/p

720p

1080i/p @ 24/50/60Hz

Tx : ± 30

 • 

Rx : ± 55

30KHz ~ 60KHz

5 meters

HDMI Type A x 1

RJ45 x 1

3.5mm Phone Jack x 1

Resolution

IR Emit/Receive Angle

IR Carrier Frequency

IR Emit/Receive Distance

Video Input /Output

Linking Interface

2 Pin Dip x 1  • 

  

Slide x 1

LED Blue x 1

 • 

RJ45 Yellow/Green x 1

HX40M Receiver

Slide x 1

Switch 

LED

IR Cable Interface

PS3

40M (max)

CAT5e Cable

Transmitter

Receiver

TV

Power Supply

Power Consumption

Temperature

Dimension (mm)

Weight (g)

420mA

180mA

Operation: 0 to 55

o

 – Storage: -20 TO 85

o

 – Humidity: up to 95%

DC 5V 1A

67 x 102 x 27

150

67 x 91 x 27

140

HX40M

LINK

DC 5V

POWER

HDMI IN

SETTING

On

HDMI & IR CAT5

IR

1 2

ON

IR

Tx Rx

Transmitter

HX40M

LINK

DC 5V

POWER

HDMI OUT

On

HDMI & IR CAT5

IR

IR

Tx Rx

Receiver

EDID Steup: Default

Set DIP switch 1 off 

Set DIP switch 2 off 

 Select the first default EDID: Support 1080i/LPCM 2 Channel

-OR-

Set DIP switch 2 on 

 Select the second default EDID: Support 1080p/LPCM 5.1 Channel

Use External EDID

1. Set DIP switch 1 on, unplug the power to Transmitter

2. Connect Transmitter to HDMI connector of TV for auto backup

3. Plug in power for Transmitter, TV EDID back up complete when Blue LED keeps flashing

4. After TV EDID backup, Transmitter power must be reset (unplug and plug) to activate

Dip Switch Function

1. Use the default EDID

    Use the backup TV EDID

2. Select the first default EDID: Support 1080i/LPCM 2 Channel

    Select the second default EDID: Support 1080p/LPCM 5.1 Channel

After changing Dip Switch settings, power must be reset (unplug and plug) to activate

LED Indication

BLUE  

Power

BLUE Flashing 

TV EDID backup completed

GREEN   

Sending and Receiving power & HDMI signal 

YELLOW  

No data input or signal too weak

Transmitter

Receiver

Отзывы: