27
Self Test
This is a series that can be run to test the board’s key components.
1. From the Settings menu, press
UP
or
DOWN
until
Self Test
is displayed.
Self Test
START
2. Press
OK
to start the tests, then follow the instructions displayed.
The following components are tested:
The buzzer sounds upon completion of each test.
•
UP
button
•
OK
button
•
DOWN
button
•
EXIT
button
•
Potentiometer’s low values
— Rotate all the way to the left.
•
Potentiometer’s high values
— Rotate all the way to the right.
3. Press the
RESET
button when finished.
“Reset” Setting
This reboots the module and resets the LCD display. It is the same function as pressing
the
RESET
button.
