8
This document is subject to change without notice.
Document No: 0019-02-08-01-000 (Issue B)
Date Published: September 9, 2015
B1010SP0-EVB-1 Evaluation Board User Guide
3. Some of the default settings need to be customized for your particular evaluation kit, including:
a.
Bluetooth Address
b.
Crystal Trim
c.
Device Name
The Bluetooth Address and Crystal Trim need to match the values printed on the target board label.
Figure 11 - Example Target Board Label
4. Open the
hr_sensor_cs101x_A05.keyr
file in the SDK and change the values
&BDADDR
and
&CRYSTAL_FTRIM
to match
the label.
Figure 12 - Location of Bluetooth Address and Crystal Trim Values to be Modified
5. For the Bluetooth Address, the Endian format of the value on the label must be converted as shown below.
Figure 13 - Example Bluetooth Address Conversion
