CEL-MAR ADA-1028L, Руководство пользователя

Страница: 9 / 12

7. SPECIFICATION
TECHNICAL DATA
Transmission Parameters
Interface RS-232 Current Loop
Connector DSUB-9 Female Screw terminal, wire max. Ø 2,5mm 2
Line length Up to 15 m
Depends on baud rate up to several
hundred meters
Maximum number of connected device 1 4
Transmission line
Cable DB9F/DB9M multi-core 9x0,34
shielded or twisted cable 9-pairs UTP
24AWG shield inside large interferences
STP 24AWG.
1-pair twisted cable, UTP Nx2x0,5
(24AWG), shield inside large
interferences (STP Nx2x0,5(24AWG)).
Standards EIA-232, CCITT V.24 Current Loop CLO 0-20mA
Maximum baud rate 19,2 kbps kbps (depend on length of Current Loop CLO line)
Transmission type Asynchronism half duplex or full duplex,
Optical signalisation
• PWR – green LED power supply,
• RX - red LED data receiving through Current Loop CLO,
• TX - yellow LED data transmission through Current Loop CLO.
Electrical Parameters
Power requirements 10 - 24 – 30 V DC
Power Cable Recommended length of power cable – up to 3m
Power 2W
Protection from reverse power polarization YES
Galvanic Isolation
1kV= or 3kV= between power circuit and RS232 signal line
1kV= or 3kV= between power circuit and Current Loop signal line
Optoisolation Min. 2,5kV - between Current Loop signal line and RS-232
Electromagnetic compatibility
Resistance to disruptions according to the standard PN-EN 55024.
Emission of disruptions according to the standard PN-EN 55022.
Safety requiring According to the PN-EN60950 norm.
Environment Commercial and light industrial.
Environmental Parameters
Operating temperature -30 ÷ 60°C
Humidity 5 ÷ 95% - non-condensing
Storage temperature -40 ÷ 70°C
Casing
Dimensions 53mm x 90mm x 62 mm,
Material PC/ABS
Degree of casing protection IP40
Degree of terminal protection IP20
Weight 0,10 kg
According to standard DIN EN50022, DIN EN43880
Location during work Free
Mounting method On the rail compliant with DIN35 / TS35 standard.
9
ADA-1028L