3
•
Condensation or damp environment when rain soaked body, do not turn the machine off or try to use the machine
- -
Doing so may damage the machine and cause an electric shock hazard
•
When assembling or disassembling machine parts, unplug
- -
Doing so may accidentally touch the button to start the machine operating result in personal injury or electric shock hazard
Precautions
In order to make better use of the machine, observe the following during use
•
This equipment is specialized in the production of soft ice cream machine, to use raw or soft ice cream soft ice cream powder mix formulated for
production, not for frozen drinks and slush
- -
When using the soft ice cream powder, cream powder generally per 1 kg against 2.5 liters of purified water to 3 formulated feed. Water was added too little may result in difficult to
form ice, add too much water will affect the puffing effect and prone to freezing cylinder
- -
If you need to add other seasoning ingredients, please consult our technical staff for advice
•
Regardless of whether the device is working, do not shield the top of the hot gas outlet
- -
There are hot air discharge when the machine is working, if the exit is blocked may affect the cooling effect and even trigger protection. To avoid affecting the life of the machine or
business interruption, please do not place anything hot air outlet
•
Do not wash long dry run (or when cleaning) in the absence of raw materials, do not open the refrigeration
- -
The dry run will lead spatula and stirring shaft bushing for excessive wear, the future impact of the cooling effect. After cooling dry run or if the raw material is poured into water, the
liquid will quickly freeze, may cause abnormal wear or overload scraper
•
Note that when the blade shaft washable stirring, carefully cut sharp edge
•
Do not tilt or lateral placement machine, if not carefully tilt, place after being wait 30 minutes before use
- -
After the machine tilted frozen oil may flow back to the trachea, then open the opportunity to cause damage to the compressor, the oil flows back to the bottom should be re-boot
•
Do not use hot water cleaning equipment
- -
After cooling hot water cylinder temperature decreases slowly, if not promptly remove the excess moisture that could cause rapid propagation of bacteria hazardous to their health
•
Periodic cleaning up the dust the condenser
- -
After some time the use of the machine, the condenser will accumulate dust intake port, it will affect the cooling effect of excessive dust. Dust before cleaning, turn off the machine
and disconnect the power outlet, disassembly body right side (the side without warning signs) side plates, to sweep dust intake port