manualshive.com logo in svg

CEG ECO-MXA 404, Инструкция по установке и эксплуатации

Поделиться
Скачать
CEG ECO-MXA 404 Скачать руководство пользователя страница 3

Every care has been taken to ensure the accuracy of the information contained in this publication, but due to continuous development  and improvement the right is reserved to supply products 

which may differ slightly from those illustrated and described in this publication.

3

www

.ceg.co

www

.ceg.co

www

.ceg.co

www

.ceg.co

www

.ceg.co

SUPPLIED WITH PRODUCT

GENERAL

Depending of your choice of model, the ECO-MXA is available in three different configurations

ECO-MXA BARE PUMP

- ECO-MXA pump 
- 1.5 metre lead with NZ/AU compatible plug
- Installation and operating instructions
- Certified of conformity to AS/NZ standards
- Warranty card

ECO-MXA WITH ELECTRONIC PRESSCONTROL

- ECO-MXA pump
- Electronic PRESSCONTROL
- 25mm non-return valve
- 5m x 12mm thread seal tape
- 1.5 metre lead with NZ/AU compatible plug
- Installation and operating instructions
- Certified of conformity to AS/NZ standards
- Warranty card

ECO-MXA WITH ELECTRONIC PRESSCONTROL 

& 3L PRESSURE TANK

- ECO-MXA pump
- Electronic PRESSCONTROL
- 3L pressure tank
- 25mm non-return valve
- 5m x 12mm thread seal tape
- 1.5 metre lead with NZ/AU compatible plug
- Installation and operating instructions
- Certified of conformity to AS/NZ standards
- Warranty card

Dear Customer,

Congratulations on your purchase of the CEG ECO-MXA water pump. Like all CEG products, we have developed them with 

the help of the latest technology and they have been manufactured with the most advanced components. Please check the 

following points upon receiving your pump: 

-  Check that no damage has occurred during the shipping process
-  See page 4 for technical Table 1.0 to ensure the pump model is fit for your purpose

Take the time to read the instructions carefully before using the ECO-MXA pump. We strongly recommend that you keep 

this instruction manual in a safe place for future reference. Please fill in the service reference information on page 20 and the 

warranty card supplied with product

These Safety marks are contained in these Instructions. 

This symbol means danger.  If not complied with it may 

cause death or severe physical injury.

This symbol means caution.  If not complied 

with, this may result in damage to product.

Содержание ECO-MXA 404





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды