User Instructions for the Bariatric Toileting/Shower Chair
X399
Ref: X399 Nov17
Form No: Cef 0035
Footrests:
On each side of the front legs of the commode main frame there are two
retaining lugs either side.
Take the footrests and align the holes in the i
nverted “U” section with the lugs.
Lower down into place.
Rotate the foot rest towards the commode and clip into place.
The footplates can be rotated up and down as necessary, should they
temporarily not be required without the need to remove the footrest.
Handles:
The handles can be fitted in two ways either turned inwards to run parallel
with the chair back or facing outwards at 90° to the chair back.
To change push out the pin-clip securing them and rotate handles to suit.
Push the clip back in ensuring it is secure.
Seat:
The seat is reversible (the insert can be located to either the front or the rear).
This is achieved by lifting away from the location points and rotating 180
degrees before clipping the seat back into location by gently pushing back in
to location points.
The insert can be removed for showering but must be remove for toileting.
Potty:
Empty the potty after each use.
The potty can be located from either the front or the rear
Castors:
To lock: push down the lever on the castor body (all 4 are lockable).
To unlock: push the lever in the opposite way.
Accessories
A Lap Strap is available for use with the chair. This is
available as a separate item from Cefndy Healthcare. It is
essential
that a risk assessment is carried out for each
individual user of the Lap Strap. Please refer to the User
Instructions supplied with the strap.
75LAP/STRAP
