manualshive.com logo in svg

CEECO SSP-363-F, Руководство по обслуживанию, Страница: 7 / 20

Поделиться
Скачать
CEECO SSP-363-F Скачать руководство пользователя страница 7

ISSUE 4.0 

CEECO 

Communication Equipment & Engineering Company 

PROPRIETARY 

7

PROGRAMMING CONTINUED… 

 

 
 
3.6

 

If you desire the phone to 

automatically dial a number

 (up to eleven 

digits in length) when the handset is lifted, now is the time to enter it.  If 
this is not a desired function, proceed to section 3.8.  Programming 
location 

#19

 stores the auto-dial number.  Therefore, enter # 1 9 followed 

by the desired auto dial number.  For example:  Entering #199 will 
program the phone to automatically dial a 9, when the handset is lifted.  
Be sure to record your entry in the table below for future reference. 
 
1st Auto Dial Number Table: #19 __  __  __  __  __  __  __  __  __  __  __ 

 
 

3.7 

If you desire the phone to 

automatically dial a second number

 (up to 

eleven digits in length) after the one stored in location #19 (see above), 
now is the time to enter it.  If this is not a desired function, then proceed to 
section 3.8   Programming location 

#18

 stores the second auto dial 

number.  In order to use #18, you must first use #19.  This number will 
dial out approximately one second after any number stored in the #19 
location.  Enter # 1 8 followed by the desired auto dial number.  For 
example:  Entering #1818005551212 will program the phone to dial 1-
800-555-1212 approximately one second after it dials the number stored in 
location #19.  Combining the examples from this section and the one 
above, entering #199#1818005551212 will program the phone to 
automatically dial 9, pause one second and automatically dial 1-800-555-
1212, when the handset is lifted. Be sure to record your entry in the table 
below for future reference. 
 
2nd Auto Dial Number Table: #18 __  __  __  __  __  __  __  __  __  __ __ 

 
 

3.8 

If you desire to have 

speed-dialing

 capability, now is the time to program 

it.  If this is not a desired function, proceed to section 3.10.  There are 40 
speed-dial locations available.  Those 

locations are #30 thru #69

.  The 

speed numbers may be up eleven digits in length.  Simply enter the pound 
key, followed by the location number, followed by the desired speed dial 
number.

   

 
 

 

Example:

  Entering 

#30

5551212

#31

5875430

#32

5839907 will program  

 

 

the phone to automatically dial 555-1212 when #30 is dialed, 587-5430 

 

when #31 is dialed, and 583-9907 when  #32 is dialed. Please note that, 
when the phone is put into operation, the # key must be dialed preceding 
the two digit location number, in order to release the speed dial number. 

 

Содержание SSP-363-F





















Отзывы:

Нет отзывов