Cedarslink CE-234XL, Руководство пользователя

Страница: 2 / 4

S
afety Information
This symbol, wherever it appears, alerts you to the presence of
uninsulated dangerous voltage inside the enclosure-voltage that
may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the accompanying
literature. Please read the manual.
CAUTION:
1. Avoid Excessive Heat, Humidity, dust and vibration.
2. Avoid Physical Shocks.
3. Do Not Open The Case Or Attempt Repairs Or Modifications Yourself.
4. Clean Wit A Soft Dry Cloth. h
5. Always Use The Correct Power supply.
6. The Product Should Be Serviced By Qualified Service Personnel.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
S
pecifications
INPUT:
Connectors: XLR
Type: Electronically balanced/unbalanced, Therefore filtered
Max Input Level: +22dBu, balanced or unbalanced
CMRR: >40dB, typically >55dBu at 1KHz
Impedance: balanced >50K Ohms; unbalanced >25K Ohms
OUTPUT:
Connectors: XLR
Type: Electronically balanced/unbalanced, Therefore filtered
Max Output Level: +22dBu, balanced or unbalanced
Impedance: balanced 200 Ohms; unbalanced 100 Ohms
PERFORMANCE:
Bandwidth: 20Hz to 20KHz,+0/-0.5 dB
Frequency Response: <3Hz to >90KHz, +0/-3dB
Signal-to-Noise: Ref, +4dBu, 22KHz measurement band wisth
Stereo Mode : Low Output >94dB; Mid Output >93;
High Output >91dB
Mono Mode : Low Output >94dB;
Low-Mid Output >94dB;
High-Mid Output >92dB;
High Output >88dB
Dynamic Range: >106dB, unweighted, any output
THD + Noise: <0.004% at +4dBu, 1KHz
Inter channel Crosstalk: <-80dB, 20Hz to 20KHz
CROSSOVER FREQUENCIES:
Stereo Mode:
Low/High: 45 to 96Hz or 450Hz to 9.6KHz(x10 setting)
Low/Mid: 45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Mid/High: 45 to960Hz or 450Hz to9.6KHz(x10setting)
Mono Mode:
Low/Low-Mid: 45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Low- Mid/High-Mid: 45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
High-Mid/High: 45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Filter Type: linkwitz-Riley, 24dB/octave, state-variable
FUNCTION SWITCHES:
Front Panel:
Low Cut: activates 40Hz Butter worth, 12 dB/octave high-pass filter, one
switch per channel
Phase Invert: Inverts the phase at the out, one switch per output
Rear Panel:
x10: Multiplies crossover frequency range by 10, one switch per channe
Mode: Selects stereo/mono and 2/3-way operation
LF SUM: Selects normal(strso) or mono- summed low frequency operation
Size & Weight
Operating Voltage: 110VAC 50/60Hz, 220VAC 50/60Hz
Mains Connection: IEC receptacle
Power Supply
Size: 482mm(W) x 150mm(D) x 45mm(H)
Weight: 3Kg