Cedar DNS 4, Руководство пользователя

Страница: 17 / 32

CEDAR DNS 4 dialogue noise suppressor
Page 17
The global setup page
Pressing Setup a second time takes you to the Global setup page. There are three
parameters, each of which has two possible settings.
■
Inputs
Select the analogue or digital inputs. If the input selection is set to digital and no valid
digital signal is present at the digital input, a flashing cross will appear inside the AES1/2
or AES3/4 fields and the DNS 4 will not process audio.
■
Routing: Split mode operation
In split mode, the signals presented to inputs 1&2 are duplicated and sent to channels
3&4. This allows inputs 1&2 to be processed and output in two different ways, including
outputting the duplicate pair without processing to create ‘iso’ tracks.
■
Outputs 3 & 4: analogue line or AES3 digital
Select whether outputs 3&4 carry line level analogue or digital signals. The input/output
selections operate as follows:
Input Output Output 1 Output 2 Output 3 Output 4
1 Analogue Analogue Line 1 Line 2 Line 3 Line 4
2 Analogue Digital Line 1 Line 2 AES 3 1&2 AES 3 3&4
3 Digital Analogue Line 1 Line 2 Line 3 Line 4
4 Digital Digital - - AES 3 1&2 AES 3 3&4