4 x
5/16 x 2-3/8” Wafer Bolt
(5/16” flat washer)
8 x
5/16 x 2-1/8” Wafer Bolt
(5/16” flat washer)
Hardware
WB9
J:
Starting at the bottom of the Swing Side Wall Panel Assembly, loosely attach both (041) Wall Ties to (030)
Narrow Window Panels, making sure the t-nuts are facing inward (fig. 4.12), with 2 (WB9) 5/16 x 2-1/8” Wafer
Bolts (with flat washer) per board, as shown in fig. 4.11 and 4.13.
K:
Noticing the angled edges of (043) Joist Sides face towards (030) Narrow Window Panels and the t-nuts are
facing inwards, loosely attach both (043) Joist Sides to the (030) Narrow Window Panels with 2 (WB8) 5/16 x
2-3/8” Wafer Bolts (with flat washer) per board, as shown in fig. 4.11.
L:
Loosely attach both (042) Long Wall Ties to the tops of (030) Narrow Window Panels, with t-nuts facing
inwards, using 2 (WB9) 5/16 x 2-1/8” Wafer Bolts (with flat washer) per board, as shown in fig. 4.11.
Step 4: Swing Side Wall Panel Assembly
Part 5
Fig. 4.12
Fig. 4.11
Fig. 4.13
041
Notice T-Nuts are
facing inward
043
042
Top
Bottom
WB8
WB9
WB9
030
WB9
WB9
WB8
WB9
030
040
5/16” Flat
Washer
Notice angles
converge at centre
with 5/16”
Flat Washers
WB8
39
Содержание F25630
Страница 112: ...NOTES 112 support cedarsummitplay com ...
Страница 113: ...NOTES 113 support cedarsummitplay com ...