Shiningway International
5
4. The screen will show “the capacity is low” message and need charging when the battery voltage is low. And if
prompt tone –alert tone is set for any mode in the menu profile, the alert tone will ring as reminder.
Note: battery performance (standby and call time) varies from different operation methods and networks.
■
Procedures for charging
1. Install the battery in the phone and adapt the charge plug of the travel charger to the slot at the bottom of the
phone.
2. Insert the power plug to the standard alternating socket and turn on the power supply to charge. The screen
shows charging image when the phone is off.
3. The capacity indicator showing fullness indicates the charging is finished. Then pull the travel charger off the
socket and the phone.
Note: Do not use the phone by connecting to the charger if the battery is taken out.
Power on and off
♦
Long press power/end key to turn on the phone.
♦
Long press power/end key to turn off the phone.
Note: To press power/end key to turn off, the phone must be at unlock status.
Security code
There are several security codes for the phone and SIM card, which protect your phone and SIM card from being
used by others. Enter correct code (show as “*”) and press “OK” when any of the following codes are required.
Scroll down “Manu
→
safety settings
→
change code” to change PIN, PIN 2 and the phone code.
Phone code
The phone code refers to phone lock and mobile code to safeguard your mobile from being used by others. The
code is generally accompanied with the phone offered by the manufacturer. The pre-setting code is 1111. If the
phone is locked, it will require entry of code to turn on the phone.
PIN
PIN (Personal Identification Number, 4 to 8 digits) can prevent other persons from using your SIM card without
your permission. PIN is generally accompanied with the phone offered by the network operator. If PIN check is on,
it will require entry of PIN to turn on the phone each time. Incorrect entry of PIN three consecutive times, SIM card
will be locked. To unlock it as follows:
●
enter correct PUK as the screen prompts;
●
then enter new PIN and press “OK”;
●
AT prompt of reentry of new PIN, enter new PIN again and press “OK”;
●
If PUK is correct, the SIM card is unlocked and PUK is renewed.
PUK
PUK (PIN Unlock Key, 8 digits) is used to unlock PIN. PUK is generally accompanied with SIM card offered by
the manufacturer. If not, please contact the network operator providing you service. Incorrect entry of PUK ten in
consecutive times, SIM card will be invalid. You need contact the network operator to renew the card.
PIN2
PIN2 (4 to 8 digits) is accompanied with SIM card offered by the manufacturer, serves for setting “call metering”
and “fixed dial”, etc.. Please contact with the network operator to confirm whether your SIM card supports these
functions. If you wrongly input PIN2 in consecutive three times, PIN2 will be locked, and only entry of correct PUK2
