![cecotec FORCECLIMA 7050 Скачать руководство пользователя страница 27](http://html.mh-extra.com/html/cecotec/forceclima-7050/forceclima-7050_instruction-manual_2577983027.webp)
ENGLISH
27
FORCECLIMA 7050
UNIT STORAGE
•
Unscrew the drainage cover, remove the water lid and empty the water in the water tray
into other water containers or directly tilt the body to discharge the water into other
containers.
•
Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state
until the drainage pipe dries, so as to keep the inside of the body dry and prevent it from
mildewing.
•
Turn off the machine, unplug ir from the power supply, and wrap the power cord. Install
the water lid and the drainage cover.
•
Remove the exhaust pipe and store it properly.
•
Cover the local air conditioner with a plastic bag. Put the local air conditioner in a dry
place, keep it out of the reach of children, and take dust control measures.
•
Remove batteries from the remote control and keep them properly.
NOTES
: ensure that the body is placed in a dry place and store all machine components
properly.
6. TROUBLESHOOTING
Do not repair or disassemble the local air conditioner by yourself. Unqualified repair will lead to
failure of the warranty, and may cause damage to users or their properties.
Problems
Reasons
Solutions
The local air
conditioner
does not work.
There is no electricity.
Turn it on after connecting it to a socket with
electricity.
The overflow indicator displays
“FL”.
Discharge the water inside.
The ambient temperature is too
low or too high.
It is recommended to use the device in a
temperature range of 7-35 ºC (44-95 ºF).
In cooling mode, the room
temperature is lower than the set
temperature.
Change the set temperature.
In dehumidification mode, the
room temperature is low.
Place the product in a room where the
temperature is over 17 ºC (62 ºF).
The cooling
effect is not
good.
There is direct sunlight.
Avoid direct sunlight by using curtains, for
example.
Doors or windows are open; there
are a lot of people; or in cooling
mode, there are other sources of
heat.
Close doors and windows, and restart the
local air conditioner.
The filter screen is dirty.
Clean or replace the filter screen.
The air inlet or outlet is blocked.
Clear obstructions.
05244_FORCECLIMA 7000_Manual_LI_MV.indd 27
19/12/18 12:51