FAST&FURIOUS 9040 ABSOLUTE / 9050 X-TREME
27
26
Img. 2.
Insert it int the direction shown by the arrow and check if it is in place by pulling it back after
clicking into place.
Support rod height adjustment
Release the support rod lock, adjust to the desired height, and then fasten the support rod
lock again.
Img. 3.
Once the height is adjusted, you may use a hanger to iron sheets, dresses or delicate
garments comfortably. (Only included in Fast&Furious 9050 X-Treme)
Note: Before use, check whether there is deposits in the water pump inlet tank of the machine
body. If there is any deposit, please remove it; if the steam hose outlet is blocked, clear it.
Water tank ���
Open the water tank by pulling upward from the handle and add water.
Then place the water tank in the main unit and cover the water tank handle.
Img. 4.
It is recommended to use tap water at room temperature to use the device.
Do not use hot water, vinegar, starch, detergent, additives or other chemical products.
If water in your zone contains high amounts of scale, mix demineralised water or distilled
water with tap water.
Warning: Do not use distilled, descaled or perfumed water only.
How to use the steam station
Note:
Be careful of hot water from the steam outlet of the iron before use to prevent burns.
When using the appliance, pay attention to prevent the danger caused by steam spray.
Img 5
Steam levels
1. Dry clothes
2. Fibre
3. Silk
4. Wool
5. Cotton
6. Linen
Horizontal ironing
Place the clothes horizontally on the ironing board.
Connect the device to a power supply. The device will beep and the lack of water and
descaling indicators will blink and turn o�.
The operation light indicator will turn on and then enter standby mode. Press the main
switch, the operation light indicator will blink.
The device will start preheating, this process will take 2 minutes 30 seconds approximately.
During this process, no steam will be emitted.
Once the device is preheated, the operation light indicator will remain steady on.
Press the manual steam switch to release steam or press the automatic steam switch
(automatically releases steam during 1 second and then stops for 1 second). At this time, the
iron knob can be adjusted.
There are 6 modes: Dry clothes, chemical ��e, silk, wool, cotton and linen. Select the desired
one according to the type of garment to be ironed.
Vertical steam ironing
Hang the clothes or garment from the device.
Connect the device to a power supply. The device will beep and the lack of water and
descaling indicators will blink and turn o�.
The operation light indicator will turn on and then enter standby mode. Press the main
switch, the operation light indicator will blink.
The device will start preheating, this process will take 2 minutes 30 seconds approximately.
During this process, no steam will be emitted.
Once the device is preheated, the operation light indicator will remain steady on.
For hanging curtains and clothes (coats, suits, jackets, etc.), use the vertical ironing function.
At this time, the iron is lifted and the steam is sprayed on the clothes.
Spray back and forth several times to remove creases.
Warning: The iron will spray hot steam. Never try to use it on clothing that someone is
wearing. Never use steam on yourself or others.
After use
After using the device, turn it o�from the main switch and unplug it from the power supply.
Let the iron rest on its heel.
Wind the power cord around the base and ���
with the clamp.
Allow the machine to cool naturally before storing.
ENGLISH
