cecotec FAST&FURIOUS 4040 ABSOLUTE, Инструкция по эксплуатации

Страница: 15 / 19

FAST&FURIOUS 4040 ABSOLUTE FAST&FURIOUS 4040 ABSOLUTE 28 27
ENGLISH ENGLISH
2 .PARTS AND COMPONENTS
Fig. 1.
1. Panel bracket
2.
Steam head
3. Lock button
4.
Steam button
5. Lower cover
6.
Ornament
7. Water inlet cover
8.
Tank
9. Head cover
10.
Cover
11. Power switch
12.
Top cover
13. Cord
14.
Brush for thick garments
15. Brush for delicate clothes
3 . BEFORE USE
Take the product out of the box.
Make sure all the accessories are included and check for any visible damage.
If any is observed, contact the Technical Support Service of Cecotec.
Remove any sticker or protective element from the steamer head.
Unwind and straighten the cord.
Install all the accessories according to this instruction manual, fill the water tank with water,
and then iron a piece of waste cloth twice to remove any possible residues. There will be little
droplets produced for the first use. This is normal.
Note: When operating the garment steamer for the first time, allow it to steam for a few
minutes to remove any impurities and odours that might have been left from the manufacturing
process.
4 . OPERATION
Installation
Hold the water tank and hold the garment steamer from the handle.
Open the water inlet cover and fill the tank with water. The water tank is removable.
Make sure a third part of water inside the tank is over the max. mark.
Make sure the maximum level mark is not exceeded.
Reassemble the water tank in its position.
Hold the handle of the device with one hand and install the additional cloth brush or bristle
brush on the steamer head with the other hand. When installed in the correct position, it will
make a sound.
Connect the device to the power socket and turn it on. The indicator light under the lamp shade
will blink once and return to the standby icon, red light. Press the power button, the indicator
light will start blinking and the device will start preheating. The indicator light will stop blinking
and turn steady on when the preheating process is completed. The device is ready to be used.
Press the power switch, the product will start producing steam.
Release the button, the product will stop producing steam.
Press the power switch to switch from standby mode to low steam, and from low steam to
high steam.
Automatic shut-off function
When the user stops using the product for more than a certain period of time, the internal
control circuit of the product will cut off the power supply and enter automatic shut-off mode.
When this happens, the standby indicator light will blink.
Empty tank protection function
This product has a protection function that activates when there is no water in the tank in order
to protect the pump and prevent the pump from dry pumping. This way, the pump’s service life
will be extended and ensured. When the water level in the tank is lower than the minimum
mark and the pump cannot draw water, the pump will automatically stop running within 30-50
seconds and the yellow indicator light corresponding to the empty tank icon will turn on.
Using the garment steamer
Note: The device is designed to be used on clothes hung vertically.
Check whether the back of the cloth is breathable, so as to avoid steam gathering on the cloth
and wetting clothes.
Check the pockets to make sure they are empty.
Check the back of the clothes for objects easily damaged by steam.
Recommendation: Do not use the device around metal parts of clothes, high-temperature
steam could cause the metal parts to fade.
When the steam button is pressed, the device will slightly vibrate and buzz. This is normal as
part of the operating process.
When steaming, touch material lightly with the fabrics brush or brush attachment and move
up and down to remove creases better. It is important not to touch the garment and/or fabric
with the device when the accessories are not assembled.
If the brush accessories are not used on the device, please keep at least 5-cm distance between