
ENERGYSILENCE 5200 / 5250 WHITE DESIGN
ENERGYSILENCE 5200 / 5250 BLACK DESIGN
ENERGYSILENCE 5200 / 5250 WHITE DESIGN
ENERGYSILENCE 5200 / 5250 BLACK DESIGN
43
42
ENGLISH
ENGLISH
With the hanging bracket secured to the outlet box and when the assembly is completed, the
fan can be hung.
Grab the fan firmly with 2 hands. Slide the downrod through the opening in the mounting
bracket and let the hanging ball rest on the mounting bracket. Turn the hanging ball slot until
it lines up with the mounting bracket tab.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to
you once you are standing on the ladder.
Blade assembly
Fig. 9
To save time, washers for blade screws can be set on each blade screw prior to installing
blades.
Align the blade holes with the motor screw holes. Once all blades are attached, tighten all the
screws. Tighten all blades screws again to ensure they are firmly fixed.
LED assembly
Fig. 10
Unscrew a set screw. Attach the LED lamp to the bottom of the fan by inserting the other 2
set screws into the key hole slots. Rotate it to place, then secure the precious set screw by
aligning the screw hole and the hole at the bottom of the fan. Then, tighten the rest of the
screws to secure the LED lamp.
Note: During the installation or when the LED lamp is removed, keep the insulation pads
intact. Turning the set screws over-tightly or fast will damage the insulation pads.
Lamp shade assembly
Fig. 11
Place the cover and the lamp shade on the LED lamp.
Decorative elements assembly
Fig. 12
Place the cover and the lamp shade, and secure them with the decorative clips and bolt nuts.
Wiring connections
Fig. 13
Warning: To avoid possible electric shock, make sure the electricity is turned off at the main
fuse box before wiring.
Insert the receiver into the mounting bracket with the flat side of the receiver facing the
ceiling.
Follow the instructions below to connect the fan to your house supply:
Connect the house supply cables and the mounting bracket.
Pay attention to the correct connection of the Live, Neutral and Ground wires.
Connect the 4-pin plugs of the mounting bracket to those of the remote control correctly.
Connect the 4-pin plugs of the remote control to those of the motor correctly.
4. OPERATION
Power parameter list
Voltage
Fan
Lamp
220-240 V
40 W
LED 12 W
Pairing between remote control and receiver
Turn the power supply on and, within 30 seconds, press and hold the remote control’s fan
ON/OFF button for 5 seconds. A “beep” will be heard, indicating a successful pairing and all
functions will work normally.
Note: The pairing initial step must be performed within 30 seconds of turning power on.
Cable de toma
de tierra
Green / Yellow stripe
L (black)
N (white)
L light (blue)
Red DC motor L
Green DC motor L
Yellow DC motor L
Remo
te c
ontr
ol
rec
eiv
er
N (white)
N input
(white)
L (black)
Green / Yellow