TOTALPURE 1400 STYLE
18
ENGLISH
Timer button
While the device is working, press the Timer button to select the operating time: 2H-4H-8H-
continuous. The corresponding indicator will turn on. The machine will enter Standby mode
after the countdown is over. Every time the Timer button is pressed, the device will beep once.
Light button (Sleep mode)
While the device is working, press the Light button to adjust the light as desired: Standard-
Soft-Off. Every time the Light button is pressed, the device will beep once.
Filter replacement reminder button
While the device is working, when the machine detects the filter is saturated after running
for 2200 hours, the light indicator will keep flashing in red. Long press the Filter button for 7
seconds to stop the indicator from flashing. Reset after installing a new filter.
Note:
The device will continue to operate normally even when the reminder of replacing filter is
activated.
4. CLEANING AND MAINTENANCE
-
Turn off and unplug the product from the power supply before cleaning or repairing it.
-
Use a soft, dry (or slightly damp) cloth with some neutral cleaning agent to clean the
product’s outside and prevent the accumulation of dust and dirt.
-
If the product is not going to be used for a long time, store it in a safe and well-ventilated
place.
-
Do not use detergent, scouring pads, chemically-treated cloths, gasoline, benzene,
alcohol, thinner, or other solvents, as these can scratch and damage the tank and cause
water leakage.
-
Do not immerse the product in water or any other liquid.
-
The only filter that can be cleaned with water is the pre-filter.
Filters
Switch the device off to stop the air filter.
Unplug the device.
Take the top cover down from the top of the machine.
Remove the filter.
Clean the filter with a dry cloth or replace the filter when the filter use indicator blinks red.
Replace the top cover.
Img
. 3.
(Page 21)
05656_TotalPure 1400 Style_IM_YV_01210217.indd 28
05656_TotalPure 1400 Style_IM_YV_01210217.indd 28
4/6/21 13:34
4/6/21 13:34
