cecotec 02307, Инструкция по эксплуатации

Страница: 11 / 34

ENGLISH
11 ROCK’NCUT TWIN
3. BEFORE USE
1. Take the product out of the box and remove all packaging materials.
2. Wash all the accessories that come into contact with foodstuffs (cutting disc, sliding
plate, food pusher and thumb guard) in hot water and soap. Rinse them with water and
dry them thoroughly with a soft cloth.
4. PRODUCT ASSEMBLY
1. Place the product on flat, dry and stable surface.
2. Install the cutting disc to the machine by placing it in its place and turning the cutting dis
fixing element completely anticlockwise.
WARNING:
do not touch the blade when assembling the cutting disc
3. Using the thickness-adjustment knob, set the plate at 0 mm.
4. Attach the thumb guard to the sliding plate.
5. OPERATION
1. Adjust the plate to the required position using the thickness-adjustment knob.
2. Connect the power cord to a power supply.
WARNING:
make sure the cutting disc is securely fixed to the unit in order to avoid accidents.
3. Place food on the sliding plate, leaving it between the food pusher and the thickness-
adjustment plate.
4. With your left thumb, press the power switch. The product will start operating and the
cutting disc will start to spin.
5. Rest your right thumb against the thumb guard and place the rest of the fingers on the
outer side of the food pusher.
6. Move the sliding plate back and forward and move the food using the food pusher
towards the cutting disc.
Correct position:
02307_Rock n cut_Manual_EA.indd 11 4/9/18 10:15