ENGLISH
ENGLISH
39
40
POWER ESPRESSO 20 BARISTA AROMAX
POWER ESPRESSO 20 BARISTA AROMAX
3. BEFORE USE
•
Take the product out of the box and remove all packaging material, stickers or labels.
•
Make sure all the components are included, and if not, contact immediately the official
Technical Support Service of Cecotec.
•
Fill the water tank with water.
•
Insert the portafilter into place and turn it anticlockwise to lock it tightly.
•
Place a container on the cup-holder tray and connect the machine to a power supply. Make
sure the steam knob is set at the off position.
•
Press the power button, the coffee machine will start preheating and then will enter
standby mode.
•
Press the hot water button to dispense hot water and press again to stop it. Then, press the
espresso or double espresso button to clean the tubing system.
•
Use warm water to clean all the coffee machine’s parts.
4. OPERATION
– Fill the water tank with water without exceeding the MAX. mark.
– Connect the machine to a power supply and make sure the steam knob is set at the off position.
Preheating
Press the power button, the coffee machine will start preheating while the on/off light indicator
blinks.
Standby
Once it is preheated, the device will enter standby mode and the 4 indicator lights and the steam
indicator will turn steady.
Hot water
From standby mode, press the Hot water button to activate this function. The light indicator will
turn on while the machine dispenses hot water. The coffee machine will dispense approx. 240-
ml hot water and then automatically stop, but the function can also be stopped manually by
pressing the Hot water button again. Once it has finished, it will enter standby mode again.
Espresso
Place an espresso filter in the portafilter, pour 13-15 g of coffee powder into the filter and
press it down. Align the portafilter with the portafilter bracket, insert it into place and turn it
anticlockwise to lock it. Place a cup on the cup-holder tray. From the standby mode, press the
single-coffee button, the light indicator will blink and the machine will start brewing coffee. The
pressure gauge will display pressure parameters during the brewing process and will be reset
when it has finished. The function will finish automatically, or if desired, can be stopped manually
by pressing the same button again.
Double coffee
Place a double coffee filter in the portafilter, pour 20-22 g of coffee powder into the filter and
press it down. Align the portafilter with the portafilter bracket, insert it into place and turn it
anticlockwise to lock it. Place 1 cup for a double coffee or 2 cups for 2 single coffees on the
cup-holder tray. From the standby mode, press the double-coffee button, the light indicator
will blink and the machine will start brewing coffee. The pressure gauge will display pressure
parameters during the brewing process and will be reset when it has finished. The function will
finish automatically, or if desired, can be stopped manually by pressing the same button again.
Recommendation
: Preheat the appliance, the portafilter, filter and cup before brewing coffee to
ensure that coffee taste is not affected by temperature.
Steam
1.
First, turn the steam knob to the preheating position, the On/off light indicator will turn
steady and the steam indicator light will blink. The steam light indicator will turn steady
when the steam function is ready to be used.
2.
From standby mode, turn the steam knob from the “0” to the Max. position, the steam tube
will start emitting steam. The steam indicator will blink. Turn the steam knob to the “0”
position again to turn the function off.
Recommendation
: Allow the coffee machine to rest for 1 minute after performing a continuous
10-minute steam operation to prevent it from overheating.