ASSEMBLY:
The four legs, faucet, float ball, and vent cap drain are packed
separately with the water boiler. Install legs by tilting the water boiler on its side
and screwing the legs into the leg supports until hand tight Carefully right the unit
and install it in its permanent location, being sure to leave at lest 6" on the right
side of the water boiler for access to the controls. Level the unit by adjusting the
bottom pad of the legs. Screw the ball float (36) onto the end of the water inlet
valve rod (35). Place the vent cap (30) into the recess in the top of the unit. Mount
the faucet assembly onto the shank (13).
GENERAL SPECIFICATIONS
DIMENSIONS (INCH)
MODEL NO.
WATER CAP. IN
GALLONS
A
B
C
D
SHIPP.
WT.(LB)
ME-10E
10.0
14
16
22.5
25.5
45
ME-15E
15.0
14
16
27.5
30.5
50
ME-30E
30.0
29
14
22.5
25.5
95
2
