cec AMP3300R, Руководство пользователя

Страница: 4 / 8

X
Power - Power switch. Turns the unit on / off.
Y
Remote - Receives signals from the remote controller (LED on). Take care not to cover this
receiving window for proper remote control function.
Z
Indicator LED - These LEDs indicate the status of the protection circuit. After switching on the
unit it indicates “Error” for a short moment as well as “Wait”. After a short internal
check the lights should change to blue coloured “Play”.
After power off the unit indicates “Error” for a short time.
If “Error” status should occur during normal play and “Mute-LED” flashes fast, re-
start the unit. In case “Error” is indicated continuously please ask your dealer for
service.
[
Volume - Volume Control. Use the Volume-Knob to adjust the volume level.
If output power is too high and clipping occurs, AMP3300R will turn down volume.
Minimum volume is not absolute silence, due to AMP3300R‘s special gain manage-
ment. Use “Mute” for silence.
\
Mute - Mutes the amplifier. The Mute function is activated during start-up and the LED
flashes slowly. The “Mute-LED” lights up during change of input.
]
Input selection - Buttons to select the input source. The LED over the button shows the
selected source.
Tape - Use this input for cassette decks, MD-recorder or any other unit.
Aux1 - Connect any analog unit with RCA connector
Aux2 - Connect any analog unit with RCA connector
Tuner - Connect a tuner or any other unit with RCA connector
CD - Connect a CD-Player or D/A-Converter with balanced XLR-outlets:
e.g. DX71, TL51Z, CD3300R, CD5300, DA53.
CD-Player with only RCA output connect to Aux1 or Aux2.
!!! Never connect any digital output from e.g. a CD player!!!
XY Z [ \ ]
Front Panel