EXPERIMENTAL BROADCASTING F.M.
BROADCASTINGS STATIONS F.M.
BROADCASTINGS STATIONS F.M.
FM-2
FM-2
1
WIRING MAP.
2
HOW TO INSTALL A MICROPHONE.
Led
AN
Module
FE-2
220 V. A.C.
TRAFO.
0
0
15
220
Switch
Fuse
250 mA.
TRIMER
(Frequency Adjustment)
IN
Radio
Rod
72 cm.
DIPOLO
72 cm.
72 cm.
Input Signal
P
o
wer
S
upply
Condensador
*To add
4700 uF/25V.
MODULE
FM-2
To connect a microphone, to our FM-2 module, we suggest
you to use an electret microphone. Seeing the drawing you
could note that you had to firstly change the C1 capacitor to
allow that its negative sign could indicate the negative sign
drawn. The, connect a 4K7 resistor between the input IN and
the positive of the power supply. Do not forget that the
negative of the microphone is the pin connect to its frame.
L ATERAL
MICROPHON'S
VIEW
C1
4.7uF
Micro
Power Supply
FM-2
4K7
IN
Rev. Full9742
TECHNICAL CONSULTATIONS.
If you have any doubt, you could contact your wholesaler or our Technical Department.
- E-Mail,
. 34.93.432.29.95
by mail. P.O. Box. 23455 - 08080 Barcelona - Spain.
-
For any repair, the corresponding invoice had to be added. If the invoice is not
presented together wish this module, the module’s warranty will be automatically cancelled.
[email protected] | Fax
|
Keep the invoice of this module.
Much more CEBEK module’s are aviable in our products range, please,
require our general catalogue or visit our Web side.
Http://www.cebek.com
All the module’s CEBEK have
in technical repairing,
and spaces from the date of buy.
3 years of total warranty
GARANTIA
GARANTIE WARRANTY GARANTIA
3
ANNÉ
AÑOS
YEARS
TO
TAL
ANYS
