8
Installation (continued)
5
Identifying the screw length to
use
□
Insert a straw or toothpick into one of the
mounting holes on the back of your TV. If
your TV is curved or recessed, place the
proper sized spacer (GG) on top of one of the
mounting holes fi rst. Use a pencil to mark the
depth of the mounting hole.
□
Determine the proper screw length to use by
comparing the mark with the various screws
provided (CC – FF).
CAUTION:
When the screw is longer than the mark,
choose a shorter screw.
Flat
Curved
Recessed
6
Removing your TV from the
wall
□
Center the brackets (B) vertically to the back
of the TV.
□
Attach the brackets (B) to the back of the TV
using the properly sized screws and washers
you chose in steps 4 and 5.
CAUTION:
Tighten the screws so the brackets are fi rmly
attached. DO NOT OVERTIGHTEN. This may damage your TV.
□
For M4 and M5 screws (CC and DD), use M4/
M5 washers (HH). For M6 and M8 screws (EE
and FF), use M6/M8 washers (II).
HH-II
CC-FF
CC-DD
B
HH
OR
GG
EE-FF
II
GG
