cdvigroup.com
6
STAR1M - Mullion Mifare
®
standalone controller and card reader
INSTALLATION MANUAL
EN
Enter programming mode
Yellow led
Present user card
Beep + green LED then yellow LED
Blue LED
Present the master badge
Swipe the master badge or
wait 10 seconds
Exit programming mode
To add more cards, repeat step user card
and step shadow card.
Present the shadow card
2 beeps + green LED flashing
Add user cards (max. 150)
Delete user cards
Enter programming mode
Yellow LED
Present the user card or its shadow card
Beep + LED OFF then back to yellow LED
Present again the same card
Beep + red LED then back to yellow LED
Both cards are deleted
Blue LED
Present the master badge
Swipe the master badge or
wait 10 seconds
Exit programming mode
7.1 Shadow mode
In Shadow mode, two different badges are programmed for the same user. The user
gets one of the two badges and the second badge is stored in a secure place by the
system supervisor as a shadow badge. These 2 badges can both grant access. In the
event that the user badge is lost or stolen, the shadow badge can be used to delete the
user badge from the STAR1M.
1
ON
2
ON
3
ON
4
ON
ON
OFF
Dipswitch setting
