CDVI Wireless SPA VIA PIAVE, 23- 31020 S.PIETRO DI FELETTO (TV) – ITALY
Tel. +39.0438.450860 R.A. – Fax. +39.0438.455628 I. 03023780269
internet:
www.erone.com
- e-mail:
TCF-162
08/2015
Pag 7 of 21
4.0
Description
4.1
How to Use the INOX Lock with the RF Receiver
The RF system is composed by:
- A RF receiver with cables for internal connections,
- two USER Tx,
- and one Master Tx.
The RF Receiver can handle max 10 User Tx, and 3 Master Tx.
Master Tx has two pushbutton. Master TX is for maintenance, and cannot open the lock.
“A” button is for ADD menu, “B” button is for DELETE menu.
USER Tx has one pushbutton to open the Lock.
On the RF receiver board there is a Push Button for ADD or DELETE operations.
To access the Push button you have to disassemble the lock.
MASTER Tx
If the Lock is already installed you must use the MASTER Tx.
To control one single Lock by RF at a time, a Magnet has been inside the Master Tx, and a
magnetic switch on the RF receiver, otherwise you may control unwanted locks in the range!
The Master Tx must be placed on the lock, under the keyboard, to be detected and signalled by a
BEEP tone.
“A” Button is to enter the ADD Menu, “B” Button to enter the DELETE_Single_User, or
DELETE_ALL Menu.
You can ADD max 3 MASTER Tx. You cannot REMOVE MASTER, to delete Master you have to
clear all memory - Factory default. The Master Tx are NOT allowed to open the Lock.