EN
18
CDV-47DX
2EASY 2-Wire Wi-Fi Monitor, Black or White
Wireless Settings
WIFI adaptor
1. Touch to enter the wireless setting
interface.
2. Touch to activate the function, making
sure the Wi-Fi switch is ON.
3. Touch to enter WLAN setting interface.
Setting
Call Tune
General
Installer
Wireless
About
Wifi switch
[ON]
Wlan setting
Wireless device regist
[00]
SIP config
SIP tools
3P-USB cable for
FW updating
DIP Switch Set address
CDVI CDV-47/DX monitors are preset to allow the address to be changed through the
user interface (Installer Settings). DIP switch 6 is the only switch that needs to be set.
• Bit-1 to Bit-5 are used for user code settings. The value range is from 0 to 31, which
have 32 different codes for 32 apartments.
• Bit-6 is the bus line terminal switch, which should be set to “ON” if the monitor is at
the end of bus line, otherwise be set to “OFF”.
Bit-6 switch setting
ON(1)
=
OFF(0)
=
ON
ON
ON
1
2
3
4
5
6
Bit state
Setting
Bit state
Setting
1 2 3 4 5
6
ON
When monitor
is not at the
end of bus line.
When monitor
is at the end of
bus line.
1 2 3 4 5
6
ON
This monitor is assigned with DIP setting instructions.Total 32 DIP codes.
Setting
Call Tune
General
Installer
Wireless
About
Current addtess
[01]
Intercom enable
Enable
IPC Setting
Monitor list manage
System settings