EN
EN
19
CDV-47
2EASY 2-Wire TFT Monitor, Black or White
18] SETTINGS
Date & time settings
You can correct the current date and time at any time by following the procedure below.
1.On main menu page, touch
settings icon ->
[Date&Time]
. Or directly touch
current date and time area in shortcut to enter
Date&Time
setting page.
2.Touch the setting target of month, date, year, hour, minute and second individually,
then touch / icon to change the value.
3.When the setting has finished, touch
to save the settings.
Note:
1. The system time can also be synchronized.
2. Touch
icon to exit and return to main menu page.
Date&Time
Sync From System Clock
RTC Server Enable
20
16
03
08
14
26
30
Ring tone & Volume settings
The ring tone can be set individually to distinguish different calling sources. A total 20
ring tones can be selected.
• On main menu page, touch
settings icon ->
[Sounds]
.
• Touch the setting target of door tone, intercom tone, door bell tone and alert tone
individually, then touch / icon to change the tone. Settings will perform
immediately.
Note:
1. If the door ring mode is selected to United, the ring tone of Doors 1/2/3/4 must be the same.
2. Touch
icon to exit and return to main menu page.