w w w . c d v g r o u p . c o m
Installation Manual
w w w . c d v g r o u p . c o m
Wiegand Proximity Readers
98 mm (3.9")
77 mm (3")
19,5 mm
(.75")
140 mm
(5.5")
35 mm
(1.4")
21,5 mm
(.8")
104 mm (4.1")
80.5 mm (3.5")
23 mm
(.9")
140 mm
(5.5")
42 mm
(1.7")
23 mm
(.9")
PRODUCT OVERVIEW:
The DGLP WLC and DGLI WLC are two Wiegand Proximity readers, availa-
ble as standard size and narrow style (DGLP FN WLC et DGLI F WLC). Both
readers are sealed with epoxy, therefore they are suitable for external use
and have high resistance to vandalism.
DGLP WLC
DGLP FN WLC
DGLI WLC
DGLI F WLC
53
-25°C to +70°C
Measure and mark the center lines to
determine the reader position. Drill the
fixing screw holes (Diametre: 4MM for the
mounting plate and 6MM for the reader).
Drill the wiring access area.
DGLI F WLC
Insert the brass anchors in the mounting
holes, connect the cable to the connectors,
then fasten the reader with the DIAX®
screws using the DIAX® spanner. Make
sure that the varistor is connected on the
lock (refer to page 2 «Recommendations»).
DGLP FN WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal
block, then fasten the reader with the
wooden screws. Put the covers on top of
the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
Optional (MPLATE)
Single gang box mounting plate for the
DGLP FN WLC mullion polycarbonate
proximity reader.
Ref :
DGLP FN WLC and DGLI F WLC
4
1
2
3
