6
Attach the black terminal to the battery’s
negative end.
3
Insert the cable terminals in the antenna
terminals respecting the colors and moving the
plastic case so they don't touch each other or
make contact with any metallic part of the
vehicle.
4
Fasten the cable with the flanges so it is not
loose around the engine area.
5
Install the antenna in one of these points
marked A or B.
6
Important warning:
To achieve good detections, make sure the detector’s view is not blocked. The antenna must be
facing forward completely horizontal to the road. If you wish to better detect the radars in overhead
signaling, you may apply a maximum slope of 5 degrees upward. Make sure no objects interfere
with its view. Install it as far as possible from metallic surfaces.
If you are uncertain about the installation, please go to a professional installer. The detection
distances may vary greatly depending on the antenna’s installation.
6.
Interpretation of alarm warnings
The detector antenna suddenly emits an almost continuous tone and the visual alarm is visible.
You are close to a radar source. This situation requires immediate attention.
The detector antenna begins to make sounds slowly, increasing the speed of the tones and the
visual alarm.
You are approaching a radar source directed toward your vehicle.
The detector antenna emits a weak signal and –suddenly– jumps to the maximum intensity.
C.D. Products S.A.