5
of
9
4. Installation and test
Select the placement of the device according to the driver's height and posture.
Perform the tests in section 4.2 before attaching it to the dashboard.
It is very important a good placement for proper operation, test at various sites and
distances until you find the best location for your vehicle.
4.1 Installation and tests
(1) Connect the micro USB charging port of the device to the car using the charging cable.
(2) Adjust the position of the seat as shown in Photo 4-1, leaving it a distance of 50 ~ 90 cm
from your face. Check that there are no obstacles between the driver and the device.
The better distances around 80 cm in ours test.
(3) Adjust the horizontal position of the camera with your head in front of it, as shown in Photo 4-
2.
(4) Adjust the vertical angle of the camera to capture your face.
(5) Connect the camera, close your eyes for 1 second, yawn or nod off to check its
functions. Then, remove the protective film from the non-slip mat and attach the device.
(If the anti-slip mat loses adhesion, you can clean it with water, wait for it to dry and it will
work again).
(6) The charging cable can be installed and set according to the actual placement.
Image 4-1 Image 4-2
C.D.Products S.A.
