6) Turn On/Off the Unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing the
power switch again.
7) Software Download & Installation
Please follow steps below to download and install monitoring software:
1. Go to the website
http://www.power-software-download.com
2. Click ViewPower software icon and then choose your required OS to download the
software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
5. Battery Replacement
This UPS is designed with easy battery replacement. Please follow below steps to replace
the inside batteries.
Step 1:
Remove the battery cover by
pushing down the front
panel.
Step 2:
Disconnect battery
connector.
Step 3:
Pull out the inside batteries
and replace with new one.
6. LCD Display
Operation Display
UPS Mode
LCD
Description
Standby
Mode
Site wiring
fault in
standby
mode
