FLEXIBLE FURLER INSTRUCTIONS
FF2
WARNING: READ BEFORE INSTALLING OR USING FURLER
Improper installation of your CDI Flexible Furler or
reinstallation of your current headstay may result in the loss
of your mast and may cause injury to those onboard.
INDEX
-
Specifications…
Page 1
-
Diagram…
Page 2
-
Parts list…
Page 2
-
Uncoiling instructions…
Page 3
-
Straightening instructions…
Page 4
-
Assembly instructions…
Page 5-8
-
Sailmaker i
nstructions…
Page 9
-
Rigger instructions
…
Page 9
-
Notes about Sailing
…
Page 9
-
Notes about Trailering
…
Page 10
-
Maintenance and Storage…
Page 10
-
Warranty…
Page 10
SPECIFICATIONS
-
Max Headstay Length
:
29’
-
Max Wire
Size
: 3/16
”
-
Max Turnbuckle Pin Size
: 5
/16”
-
Headstay
: Threaded swaged stud turnbuckle with
toggle at the bottom, a toggle at the top is
recommended but any secure fitting like a T-bolt at
the top will work. Must be secured by cotter pins.
Navtec turnbuckles are not compatible.
-
Furling line
: 3/16
” double braided line or any low
-
stretch line, twice your boat length.
Not included
.
-
Mounting
: must not be mounted above the
turnbuckle. Link plates can be used for clearance.
TOOLS
-
Hacksaw
-
Measuring tape
-
Phillips head screwdriver