30
40cm
Installation
•
Do not install this appliance if it is
damaged in any way. Installing a
damaged appliance may invalidate
the guarantee.
•
The water supply tap should be
located in an adjacent cupboard
so that it can be accessed after
installation.
•
Ensure the appliance is level by
adjusting the feet as necessary.
The dishwasher is equipped with
an adjustable rear foot that can be
raised or lowered by means of an
adjustment screw, located in the
centre of the kick plate.
•
Only use the water inlet supplied with
the appliance.
•
If the water pressure is above 10bar a
pressure relief valve should be used.
•
After connecting the water supply,
check to ensure there are no leaks.
•
The water outlet can either be
connected to a water drain or to a
sink outlet spigot. This connection
should be at a minimum of 50cm and
a maximum of 110cm from the floor.
110cm
10cm rec
ommended
4cm
fig. 20
fig. 21
fig. 22
