CDA WF140, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 28

8
Using the prewash function
The dishwasher is equipped with a prewash function to rinse off
residues prior to a full programme.
• To run a prewash programme on its own, first press the “Power”
button, then press the “Prewash” button and then press the “Start/
Pause” button.
• To run the extra-intensive programme, first press the “Power” button,
then press the “Prewash” button, select the intensive programme
with the “Programme Selection” dial and then press the “Start/Pause”
button.
Progress indicator lights
The “Progress Indicator” lights (6) illuminate in turn to show the
progress of the programme. The light for end of programme will remain
illuminated until the power is switched off.
Changing a programme in progress
• Press the “Start/Pause” button.
• Once the programme has stopped, turn the “Programme Selection”
dial to the required programme and press the “Start/Pause” button
again.
Cancelling a programme in progress
• Press the “Start/Pause” button.
• Turn the “Programme Selection” dial to “0”, then press the “Start/
Pause” button again. The dishwasher will drain for approximately
thirty seconds, and the end “Progress Indicator” light will illuminate
once the programme is cancelled.