32
Fig. 21
Fitting the
integrated
appliance door
Where non-standard integrated
appliance doors are supplied,
additional fitting instructions are
required to ensure compatibility
with this product.
The machine is supplied with
a fitting template and these
instructions should be followed as
normal.
However, the fitting template needs to be located lower down the
fascia door; this is shown below.
The amount of offset, Y, depends on the height of the fascia door and
can be calculated as
X = 723mm.
For example, if you have a 731mm tall fascia door and are fitting a door
to your dishwasher, then
Y = 731-723 = 8mm.
Ensure that the hinge tensioners are adjusted to balance the weight
of the door.
Fitting template
Y offset
X Door height
