manualshive.com logo in svg

CDA WC432, Инструкция по установке, использованию и обслуживанию

Поделиться
Скачать
CDA WC432 Скачать руководство пользователя страница 10

10

Changing a programme

It is possible to change the programme if necessary once the 
programme has started. 

•

     First open the door slightly to reduce the risk of water spillage.  

•

     Press the ‘Programme selection’ button until the required 

programme is shown on the display.

•

     Then close the door.  The dishwasher will begin the new programme 

from the point at which the old programme stopped.

Cancelling a programme

It is possible to cancel the programme once the programme has 
started. 

•

     First open the door slightly to reduce the risk of water spillage.  

•

     Press and hold the ‘Programme selection’ button for approximately 

three seconds, until the end of ‘Programme Indicator’ light flashes 
and a ‘1’ shows on the display.

•

     Then close the door.  The dishwasher will drain for approximately 

thirty seconds.  Once this is complete, the dishwasher will beep five 
times and the ‘End of programme’ indicator light will switch on.  

Switching the dishwasher off

•

     Once the dishwasher beeps five times, and the ‘End of programme’ 

indicator light switches on, the dishwasher can be switched off by 
pressing the ‘Power’ button.

•

     Then, turn off the water tap and remove the plug from the power 

socket. 

Please note: The dishwasher will automatically continue on the 
programme it has started if operation is interrupted.

Содержание WC432

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды