Instruction Manual |
15
Automatic cooking
This function allows for a delay to be set for cooking and an
automatic end time. For example, if you set the cooking duration
to 1 hour, and the end time to 15:00, then the oven will activate the
function at 14:00.
Note
: Automatic cooking is not available on any functions using the
microwave
To switch on automatic cooking
• First select a heating function and the temperature required
• Press the sensor twice and the indicator will flash on the
display
• Use the and sensors to adjust the duration as needed.
• Press the sensor again and the indicator will flash on the
display and the end time will also be shown
• Use the and sensors to adjust the end time and touch
to confirm the setting
• To clear the duration setting, either cycle down the minutes
using the and sensors until the display shows 0:00 or
touch the sensor and you will return to standby mode and
you can begin the function again.
During the cooking process the indicator will be illuminated.
Once the duration time has elapsed you will hear beeping and the
display will flash 0:00. Touch the sensor to mute the beeping
and return to standby mode. If no sensor is pressed, the beeping
will stop after 60 seconds but the display will continue to flash.