CDA VK703, Использование и обслуживание, Страница: 10 / 28

10 | Instruction Manual
Setting the clock
• In standby mode, press and hold the timer sensor until the
minutes of the display flash.
• Use and to set the minutes. Touch the sensor to
confirm the setting.
• The hours of the display will now be flashing. Use and to
set the hours. Touch the sensor to confirm the setting.
Note : The clock can only be set in 24 hour format
Setting the minute minder
Select a function and touch the sensor until the minute minder
indicator flashes. Then, use the and sensors to set the
desired time. Touch the sensor to confirm the setting or wait 5
seconds and the setting will save automatically and the indicator
will be illuminated on the display.
The minute minder can be set between 1 minute and 24 hours.
Once the duration time has elapsed you will hear beeping and the
display will flash 0:00. Touch the sensor to mute the beeping
and return to standby mode. If no sensor is pressed, the beeping
will stop after 60 seconds but the display will continue to flash.